Many PET bottle factories believe leakage problems are caused by the filling machine or bottle caps.

But after analyzing many PET production lines, we found that:

most leakage problems actually begin much earlier in the production process.

In one bottled water factory, the customer faced:

  • unstable cap sealing

  • bottle leakage during transportation

  • random leakage after storage

  • increasing customer complaints

At first, the factory repeatedly adjusted:

  • capping torque

  • cap liner pressure

  • filling line settings

However, the leakage problem continued.

After checking the entire PET production system, the real causes were:

1️⃣ Neck Finish Precision Deviation

Even small neck finish inconsistencies can create:

  • unstable cap sealing

  • uneven torque performance

  • leakage during transportation

At high-speed production, these small dimensional differences become amplified.


2️⃣ Preform Cooling Imbalance

Improper cooling during preform injection caused:

  • neck deformation

  • unstable crystallization

  • dimensional instability after reheating

Result:

cap sealing performance became inconsistent.


3️⃣ Mold-Machine Compatibility Problems

When:

  • blow molding machine

  • preform mold

  • cap mold

are not fully coordinated, small tolerance mismatches can create leakage risks across the production line.


4️⃣ Lightweight Bottle Structure Too Weak

Many factories aggressively reduce bottle weight to save resin costs.

But lightweight bottles require:

  • stronger neck support

  • stable airflow

  • balanced cooling

  • precise stretching

Otherwise:

  • bottle rigidity decreases

  • sealing stability becomes weaker


Leakage Problems Are Usually System Problems

Stable PET bottle sealing depends on coordination between:

✔ PET preform mold
✔ neck finish precision
✔ blow molding machine
✔ cap mold
✔ airflow stability
✔ cooling balance

—not only the cap itself.

This is why modern PET factories increasingly focus on:

integrated PET production systems.

Because stable production creates:

  • lower reject rates

  • lower maintenance costs

  • better customer satisfaction

  • long-term production reliability

—not simply faster machine speed.

At BangeMachine, we focus on:

  • PET blow molding machines

  • PET preform molds

  • cap molds

  • lightweight bottle optimization

  • stable high-speed PET production

Because in PET manufacturing:

small dimensional deviations create big long-term losses.