Fully Automatic 10L Plastic Bottle Making Stretch Blow Molding Machine-Full-Auto Bottle Blowing Machine(10L-20L)-Plastic bottle Molding Machinery-Borg Plastic Machinery 

Fully Automatic 10L Plastic Bottle Making Stretch Blow Molding Machine

1. Mechanical motion controlled by hydraulic system and supervised by remote-controlled computer ensure machine steadable running without noise.

2. Equipped with casting aluminum heater, temperature controlled by computer.

3. PLC program controls the machine operation swiftly and accurately.

4. Parison controller equipped on die head guarantees the wall thickness of bottle to be even.

5. Screw rotating speed can be adjusted by inverter in a wide range.

6. Special blowing design minimizes the wasted material.

7. With European Community Safety Attestation TtUV CE certificate.



Features:

A. Stable performance with advanced PLC.

B. Conveying preforms automatically with conveyor.

C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.

E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.

F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

H. Strong clamping force with high pressure and double crank links to lock the mold.

I. Two ways of operating: automatic and manual.

J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.

L. Contamination is avoided for the bottle body.

M. Ideal effect of the chilling with the chilling system.

N. Easy installation and starting

O. Low rejection rate: less than 0.3percent.

16272576991081128.jpg

Automatic PET Bottle Blow Moulding Machine is a high speed linear blow molding machine which is developed and manufactured by our Company using the most advanced bottle blowing technology in the world. Owing to the machine's high degree of automation, high production efficiency,high safety, high stability and reliability, the products made will not be contaminated in any intermediate steps, and it can be matched up directly with the production line of filling and can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle product.

Machine Settings of PET Bottle Blow moulding machine

1) PLC colour display: MITSUBISHI(JAPAN)

2) Pneumatic parts:FESTO(GERMANY)

3) Value: FESTO (Germany)

4) Other electric parts are all world-famous brand

TYPEITEMBG-10L-2
Product parametersMaximum capacity10L
Number of cavities2Cavites
Yield1500-1800pcs/hr
Maximum caliber45-80mm
The maximum diameter260mm
maximum height480mm
Power specificationsNumber of lamps60pcs
Maximum heating power100kw
Total power of the machine100kw
Actual power consumption22kw
Air pressure specificationsWorking pressure0.7-0.9mpa
Low voltage power consumption2600ltr/min
Blowing pressure25-35kg/c㎡
High voltage power consumption4500-5000ltr/min
Cooling water specificationsWorking pressure5-6kc/c㎡
Humidity range10.c
consumption6600kcal/hr
45ltr/min
Appearance specificationsMachine size5.6*2.1*2.1m
Machine weight5.5T

1.Cooperated Brand

logo_not_found
logo_not_found
logo_not_found
logo_not_found
logo_not_found
logo_not_found
logo_not_found
logo_not_found
logo_not_found
logo_not_found

2.MAIN COMPONENTS

image_not_found

Private server host.

image_not_found

PLC control Brand: Mitsubishi Option Brand: Siemens

image_not_found

Infrared heating lamp tube Ruby Lamp

image_not_found

Central Processor.

image_not_found

Mold lock.--Servo motor system

image_not_found

Cylinder MSC

image_not_found

Flip the cylinder,festo...

image_not_found

Blowing vale Fisto..


logo_not_found

Full Servo 2 Cavity 10L Automatic PET Blowing ...

logo_not_found

5l 2 Cavities High Quality Full Automatic Pet ...

logo_not_found

20L pet bottle Automatic Blowing Machine Bottl...

logo_not_found

20L pet bottle Automatic Blowing Machine OEM B...