[email protected] | +8613645861625
One with two semi-automatic blow molding machine

One with two semi-automatic blow molding machine

600-800BPH Two cavity semiautomatic bottle blow molding machine can produce two plastic bottle once. It is very mature PET bottle making machine. It is widely used to produce 100-2000ml carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
Volume of product:0.1L-2L
Production capacity:600-800 psc/hour
Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.

Description

The new double arm five fulcrum four rod clamping structure (patented), cross orientation, template balanced operation, chain transfer mode, the hinge components used are inlaid with high hardness alloy steel sleeve and high hardness alloy steel shaft, the clamping force, super wear-resistant, tight clamping seam and fine.
The whole machine adopts the super standard anti vibration overall structure design, in the high speed operation of the machine, the vibration to the minimum degree, to ensure that the use of parts is not due to the vibration of the machine and affect the service life.
And the whole casting machine frame to enhance the stability and the stability of the whole machine.
The use of linear guide rail moving template, remove the old bearing bracket. The friction force between the draw rod and the template is greatly reduced, and the service life of the machine is prolonged.
Double start work, using photoelectric safety protection device to prevent injury.
Energy saving design, can make you have a greater efficiency.
And put the bottle blank and special one-way one-way function, which take the bottle, put two action crisp, increasing production capacity.
Separate air control system to prevent the emission of waste gas pollution, to achieve health inspection standards.
The front and back, the left and the right direction of the machine head (stretching cylinder) are adopted in parallel regulation mode, so that the mold installation is more convenient and faster.R&D_3.jpg

ITEMBG-25
Clamping force13T
Clamping stroke330mm
Max.stretching stroke440mm
Number of cavities0.1-3L 2cavity
Theoretical output0.5-2.5L:800-1500bph
Max.mould thickness280mm
Mould plate size490x470mm
Voltage standard380v/3PH/50Hzorspecoal order
Total power(full loaded)3-10KW 5-15KW
Min.air compressor1.2mm3/min3.0Mpa
Blow molding machine170*60*180cm
Pre - heater150x70x140cm
Net weight1T
Container volume3L
Neck diameter range28-100mm
Container diameter150mm
Container height450mm
  • Easy manual preform loading with automatic heating and blowing
  • User-friendly PLC + HMI touchscreen interface
  • Energy-efficient heating system
  • Compact footprint for small workshops
  • Quick mold change system
  • CE certified and ISO 9001 compliant

Features & Benefits

Easy Operation

Simple manual preform loading with automatic heating and blowing cycles. Minimal training required for operators.

Compact Design

Space-saving footprint makes it perfect for small workshops and limited production areas.

PLC + HMI Control

User-friendly touchscreen interface with temperature control, parameter adjustments, and real-time monitoring.

Cost-Effective

Affordable investment with low maintenance costs. Ideal for startups and growing businesses.

Safety & Reliability

CE certified with multiple safety features including emergency stop and safety guards.

Quick Mold Change

Fast mold exchange systems minimize downtime between production runs.

FAQs & Customer Reviews

Get answers to common questions about the One with two semi-automatic blow molding machine and hear what our customers say.

Frequently Asked Questions

What is the maximum output of this machine?
The One with two semi-automatic blow molding machine has a maximum output of [news:max_output] depending on the bottle size and preform quality.
What bottle sizes can this machine produce?
This machine can produce bottles ranging from [news:bottle_volume], suitable for various packaging applications.
What is the power requirement?
The One with two semi-automatic blow molding machine requires [news:installed_power] installed power at 380V/50Hz/3-phase. Custom voltage options are available upon request.
Do you provide installation and training?
Yes! We provide on-site installation and commissioning, operator training, and lifetime technical support. Remote troubleshooting via video calls is also available.

Customer Reviews

1 / 2

Interested in This Machine?

Contact our sales team for a customized quote, technical consultation, or to arrange a factory visit.